Polyether Defoamer

Polyether defoamer SH-237

1. Main Composition

Fatty Alcohol Polyoxyethylene Poly Oxygen Propylene Ether

2. Technical Index

Item	Index	Test Method
Appearance	Colorless or yellowish liquid	By Eye
Viscosity（25℃）	100-1000mPa.s	GB/T5561-1994 NDJ-79 mechanical viscometer
Dispersity	Self-emulsifying and dispersing in water	------
Note: The above data is for reference only and is not intended as a technical indicator

3. Application

Trash Penetrating Fluid
Paper Making
Water Reducer

4. How to use

Dilute the fatty alcohol system non silicone defoamer with water or foaming solution into a homogeneous solution and then add it to the foaming liquid. It can also be added directly and should be used up as soon as possible after dilution.

5. Package & Storage

This product is packed in 25kg/50kg/200kg PE drums, or customized according to customer requirements. Please store at 5-35°C to avoid direct heating;
At the temperature of 10~30°C, under the condition of unopened packaging, the shelf life is 6 months from the date of production;

6. Product safety instructions

This information is based on the knowledge and experience of our company. The application or usage suggestions we provide are for your reference only. If you cannot confirm the safety of use, please contact us directly. Since the conditions and methods of using our products are different, it is recommended that customers conduct small trials before use to ensure safe and effective use of the products. For product standards, please contact the company, but typical product data should not be considered as a product standard. The company can provide chemical safety data sheets upon request.