What to do if the surface of silicone products is easy to stick to dust
Therefore, silicone rubber manufacturers have taken corresponding measures to deal with the problem of easy adsorption of dust on the silicone products made, such as the use of anti-static rubber, negative ion separation, etc., but this is very troublesome for consumers, so only The corresponding protective measures can be made after understanding its adsorption capacity.
First of all, after our silicone manufacturers have produced silicone products, they will cover a layer of plastic on the surface of the product that has not been removed in time. If the product needs to be stored for a longer time, it needs to be packaged with a film bag to prevent the surface of the silicone product from sticking. Dust, effectively guarantee the quality of product appearance. For products that are easy to absorb dust on the product surface, our silicone product manufacturers generally recommend that customers spray hand-feeling oil. Hand-feeling oil is a kind of oily substance that can absorb the surface of silica gel, which can increase the smoothness of the product surface and isolate the outside from contact with the product surface. , It can really achieve the effect of preventing the adsorption of silica gel products and preventing dust. Because silicone resin products are mainly based on physical adsorption, even if they are left there, they will be adsorbed to the surface of the product with electrostatic reaction. Silicone resin is an anode raw material and can be used as a variety of chemical auxiliary materials. There will be a relatively strong adsorption reaction. In order to enhance the adsorption capacity of silica gel, the active structural unit of the adsorbent should be increased.
If the silica gel is calcined to be completely dehydrated, the silanol groups of the silica gel are completely destroyed, reducing or even no adsorption capacity. If a large amount of water is added to the silica gel, its adsorption capacity will also be reduced. This is because the silanol and water form too many hydrogen bonds to reduce the active ratio.
What if a product such as a silicone protective cover accidentally gets a lot of dust? We can try to deal with the following methods.
1. The slight dust can be wiped with a dust-free cloth, and the dust on the surface of the product can be removed;
2. The more serious dirt and dust can be wiped with white electric oil, or directly soaked in white electric oil liquid and wiped with a clean dust-free cloth.