Application of water soluble UV materials in the prevention and treatment of new crown pneumonia
After 1,15, what is the cause of late attacks?
Answer: After 15 days, the disinfectant is basically released
2, 33% alcohol content does not reach the concentration to kill the new crown?
Answer: The alcohol content of 33% refers to the concentration in the sustained-release gel. Because ethanol has a low boiling point, most of the alcohol released is alcohol.
3. Do you have test data?
Answer: The report contains data on the rate of ethanol release.
4. Does the alcohol added to the water soluble UV materials participate in the reaction and slowly decompose to form a reverse reaction, or is this film coated with ethanol molecules and then slowly released?
Answer: Ethanol is not involved in the reaction
5. What material is the UV line?
Answer: No UV lines mentioned
6.What is the ethanol content?
Answer: 33%
7. Can the slow-release alcohol guarantee the disinfection effect, and have any experiments on bacteria been done?
Answer: Alcohol can disinfect itself, no need to prove
8. The release of moderate adhesive continuously increases the alcohol concentration in the room, and is it potentially dangerous to safety?
Answer: Open spaces are not dangerous. The concentration of alcohol in the air is between 3.3% and 19%, and there is a risk of explosion from an open flame. It is generally difficult to achieve such a high concentration.
9. Can any unit be produced? UV curing lamps can recommend manufacturers, and everyone works together.
Answer: My unit can produce. UV curing lamp can recommend manufacturers: Shenzhen Lanpu Rick
10. Can spray the ground or door handles, escalators, different substrates such as floor, stainless steel, ceramic tile adhesion?
Answer: It has some adhesion, but it is not important. The important thing is the slow-release effect.
11. Hello Teacher Guo! This is a disinfectant with alcohol. Is it effective as a slow-release glue for 84 disinfectant? If it can, is it possible to greatly reduce the spraying amount of chlorine-containing disinfectant? It is more significant.
Answer: Can be used as a slow-release glue for 84 disinfectant
12, Chen Na has always released alcohol will have a taste, will the concentration on the human body reach the effect of getting drunk!
Answer: Generally not, unless the space is too small and airtight
13. What is the principle of disinfection?
Answer: release the disinfectant slowly and evenly
14. Ethanol itself is used as a solvent. Will the cured resin film itself be dissolved by alcohol within 15 days? Is it sprayed on the floor?
Answer: It will not dissolve. Various non-absorbent surfaces are possible. But for humanitarian reasons, please do n’t spray on people
15. Is there a risk of fire due to fire when the appropriate alcohol is kept on film?
Answer: No risk, it is a long and slow release process
16. Can the cumulative concentration be controlled? Security must be considered
Answer: Can be controlled without risk
17. What is the sizing amount per square meter to achieve the effect of eliminating bacteria?
Answer: Sizing thickness is about 2 mm
18. What is the solid content of the construction and how does it smell after curing?
Answer: The solid content is more than 60%, and the alcohol is about 33%. Smell of alcohol
19. Professor Guo, is alcohol added to the product? Better add it in advance
Answer: Add it well in advance, or we can provide resin, and the company that prepares the disinfectant adds alcohol by itself.
20. Is the production equipment complicated? High-speed disperser?
Answer: The requirements are not complicated. Generally, an explosion-proof disperser is sufficient.
21. If sprayed on the ground, how long can I step on after spraying glue?
Answer: If sprayed on the ground, it can be UV cured immediately after spraying, and you can step on it in a few seconds.
22. How to deal with the adhesive layer after the alcohol is released?
Answer: You can water it to make it fall off, and then sweep it off. You can also repeat the sizing.
23. Is it expected that continuous operation of spraying and curing is more suitable?
Answer: yes
24. What coating method is used?
Answer: Spray, roll, brush
25. How long does it take to soak water? Spray water on the floor may not be as easy to achieve.
Answer: Water can fall off in a few minutes
26. The glue is so poor in water resistance, will the sweat that has been used fall off?
Answer: No, the sweat is too little to cause.
27. Sprinkling essence has high volatile concentration. Is there any safety hazard in lamp curing?
Answer: Slow volatilization, lamp curing generally has no safety risks, but it is best to use a cold light source
28. The alcohol that has been released will have a taste, will the concentration on the human body reach the effect of getting drunk!
Answer: Did you get drunk by smelling liquor or alcohol? If you can, congratulations
29. Does the alcohol in Riga participate in the reaction and slowly decompose to form a reverse reaction, or is this film coated with ethanol molecules and then slowly released?
Answer: Alcohol does not participate in the response
30. Is there any test data?
Answer: The report contains data on the rate of ethanol release.
Answer: After 15 days, the disinfectant is basically released
2, 33% alcohol content does not reach the concentration to kill the new crown?
Answer: The alcohol content of 33% refers to the concentration in the sustained-release gel. Because ethanol has a low boiling point, most of the alcohol released is alcohol.
3. Do you have test data?
Answer: The report contains data on the rate of ethanol release.
4. Does the alcohol added to the water soluble UV materials participate in the reaction and slowly decompose to form a reverse reaction, or is this film coated with ethanol molecules and then slowly released?
Answer: Ethanol is not involved in the reaction
5. What material is the UV line?
Answer: No UV lines mentioned
6.What is the ethanol content?
Answer: 33%
7. Can the slow-release alcohol guarantee the disinfection effect, and have any experiments on bacteria been done?
Answer: Alcohol can disinfect itself, no need to prove
8. The release of moderate adhesive continuously increases the alcohol concentration in the room, and is it potentially dangerous to safety?
Answer: Open spaces are not dangerous. The concentration of alcohol in the air is between 3.3% and 19%, and there is a risk of explosion from an open flame. It is generally difficult to achieve such a high concentration.
9. Can any unit be produced? UV curing lamps can recommend manufacturers, and everyone works together.
Answer: My unit can produce. UV curing lamp can recommend manufacturers: Shenzhen Lanpu Rick
10. Can spray the ground or door handles, escalators, different substrates such as floor, stainless steel, ceramic tile adhesion?
Answer: It has some adhesion, but it is not important. The important thing is the slow-release effect.
11. Hello Teacher Guo! This is a disinfectant with alcohol. Is it effective as a slow-release glue for 84 disinfectant? If it can, is it possible to greatly reduce the spraying amount of chlorine-containing disinfectant? It is more significant.
Answer: Can be used as a slow-release glue for 84 disinfectant
12, Chen Na has always released alcohol will have a taste, will the concentration on the human body reach the effect of getting drunk!
Answer: Generally not, unless the space is too small and airtight
13. What is the principle of disinfection?
Answer: release the disinfectant slowly and evenly
14. Ethanol itself is used as a solvent. Will the cured resin film itself be dissolved by alcohol within 15 days? Is it sprayed on the floor?
Answer: It will not dissolve. Various non-absorbent surfaces are possible. But for humanitarian reasons, please do n’t spray on people
15. Is there a risk of fire due to fire when the appropriate alcohol is kept on film?
Answer: No risk, it is a long and slow release process
16. Can the cumulative concentration be controlled? Security must be considered
Answer: Can be controlled without risk
17. What is the sizing amount per square meter to achieve the effect of eliminating bacteria?
Answer: Sizing thickness is about 2 mm
18. What is the solid content of the construction and how does it smell after curing?
Answer: The solid content is more than 60%, and the alcohol is about 33%. Smell of alcohol
19. Professor Guo, is alcohol added to the product? Better add it in advance
Answer: Add it well in advance, or we can provide resin, and the company that prepares the disinfectant adds alcohol by itself.
20. Is the production equipment complicated? High-speed disperser?
Answer: The requirements are not complicated. Generally, an explosion-proof disperser is sufficient.
21. If sprayed on the ground, how long can I step on after spraying glue?
Answer: If sprayed on the ground, it can be UV cured immediately after spraying, and you can step on it in a few seconds.
22. How to deal with the adhesive layer after the alcohol is released?
Answer: You can water it to make it fall off, and then sweep it off. You can also repeat the sizing.
23. Is it expected that continuous operation of spraying and curing is more suitable?
Answer: yes
24. What coating method is used?
Answer: Spray, roll, brush
25. How long does it take to soak water? Spray water on the floor may not be as easy to achieve.
Answer: Water can fall off in a few minutes
26. The glue is so poor in water resistance, will the sweat that has been used fall off?
Answer: No, the sweat is too little to cause.
27. Sprinkling essence has high volatile concentration. Is there any safety hazard in lamp curing?
Answer: Slow volatilization, lamp curing generally has no safety risks, but it is best to use a cold light source
28. The alcohol that has been released will have a taste, will the concentration on the human body reach the effect of getting drunk!
Answer: Did you get drunk by smelling liquor or alcohol? If you can, congratulations
29. Does the alcohol in Riga participate in the reaction and slowly decompose to form a reverse reaction, or is this film coated with ethanol molecules and then slowly released?
Answer: Alcohol does not participate in the response
30. Is there any test data?
Answer: The report contains data on the rate of ethanol release.
